1) Hand Made Software game
Found on
https://www.crosswordclues.com/clue/power-factor
The power factor of an AC electric power system is defined as the ratio of the real power to the apparent power, and is a number between 0 and 1 (frequently expressed as a percentage, e.g. 0.5 pf = 50% pf).
Found on
http://en.wikipedia.org/wiki/Glossary_of_fuel_cell_terms
In electrical engineering, the power factor of an AC electrical power system is defined as the ratio of the real power flowing to the load, to the apparent power in the circuit, and is a dimensionless number between -1 and 1. Real power is the capacity of the circuit for performing work in a particular time. Apparent power is the product of the cu...
Found on
http://en.wikipedia.org/wiki/Power_factor
[pistol] In competitive practical shooting, power factor refers to a ranking system for the momentum of pistol cartridges. The power factor is used in competitions sponsored by IPSC, USPSA, The Bianchi Cup, Steel Challenge, and IDPA. == IPSC/USPSA Power factor == IPSC and USPSA provide for two power factors, major and minor. The basis for p...
Found on
http://en.wikipedia.org/wiki/Power_factor_(pistol)
(from the article `electricity`) The cos in equation (33) is called the power factor. It is evident that the only element that can dissipate energy is the resistance.
Found on
http://www.britannica.com/eb/a-z/p/103
The ratio of actual power being used in a circuit, expressed in watts or kilowatts, to the power that is apparently being drawn from a power source, expressed in volt-amperes or kilovolt-amperes.
Found on
http://www.daviddarling.info/encyclopedia/P/AE_power_factor.html
under periodic conditions, ratio of the absolute value of the active power P to the apparent power S: NOTE - Under sinusoidal conditions, the power factor is the absolute value of the active factor.
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-46
The power factor of electrical current flowing through a circuit is the ratio of active power, also known as true power, to apparent power. Apparent power is active power plus reactive power. When current and voltage are equal, then the power factor is 1.0
Found on
http://www.used-line.com/glossaries/glossary.cfm?g_id=7
The ratio of energy consumed (watts) versus the product of input voltage (volts) times input current (amps). In other words, power factor is the percentage of energy used compared to the energy flowing through the wires. Adding capacitors to the system
Found on
http://www.youngco.com/young2.asp?ID=4&Type=3
1) Inductor flow in the pot. A high number may indicate an obstruction in circulation. 2) Term that describes the relationship between real power (KW) and apparent power (KVA) in a circuit. It is the cosine of the angle between KW and KVA on a phasor drawing of a circuit. (In a phasor drawing, this angle is the same angle formed by the voltage and ...
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
In a perfect condenser, the current leads the voltage by 90 degrees. When a loss takes place in the insulation, the absorbed current, which produces heat, throws the 90 degree relationship out according to the proportion of current absorbed by the dielectric. The power factor is the cosine of the angle between voltage applied and the current result...
Found on
https://www.emcoplastics.com/plastic-glossary-of-terms/
The cosine of the phase angle between voltage and current.
Found on
https://www.encyclo.co.uk/local/20687
Conventionally taken to be the ratio of actual power (watts) to the apparent power (VA product) in an AC circuit. When related to power converters, power factor is used as a measure of the extent to which AC input supply currents are maintained in phase with the supply voltage. Power factor of 1 means that input supply current and voltage are exact...
Found on
https://www.encyclo.co.uk/local/20757
A measure of how the voltage leads or lags the amperage.
Found on
https://www.encyclo.co.uk/local/21120
Watts divided by volt amps, Kw divided by KVA
Found on
https://www.encyclo.co.uk/local/21687
The ratio of the total power in watts (resistive load) to the total apparent power in voltamperes (V
Found on
https://www.encyclo.co.uk/local/22369
(PF) The ratio of actual power being used in a circuit, expressed in watts or kilowatts, to the power that is apparently being drawn from a power source, expressed in volt-amperes or kilovolt-amperes.
Found on
https://www.encyclo.co.uk/local/22819
No exact match found.
